Submitted on 2012/02/17 at 8:40 pm I have an 08 silverado. i had installed a 3-6 kit about a year ago. i now have a problem with the front end of the suspension “creeking” and “grinding” real bad going over bumps or pulling out of drive thru’s. what could this possibly be and what do…
Submitted on 2012/01/23 at 4:36 pm I have a 03 avalanche 2wd. Just put baer breaks on it, and going to put 24″ wheels. I want to put a drop on it, but don’t want it to rub. What is the best rout to take,and is 24″ wheels to big, should I get 22″ instead?…
Submitted on 2012/01/26 at 9:28 pm I have a 1979 f100 429ci. Im wanting 2 get lowerd. I dont want to use the i beam system anymore. is there any other kit available , or what can i modify to fit? i plan on using air bags eventually. Any ideas? the rear will be 4…
Submitted on 2012/01/06 at 5:56 pm Hi, i have a 88 ford ranger it has a 350 C.I chevy engine in it and i was wondering if your DJM front springs could handle the extra weight i also want to put a flipkit on the back with some wide slicks to give it more of…
Submitted on 2012/01/06 at 2:20 pm I have 2002 ext cad chevy truck with the 2/4 drop with control arms and hangers and shackles. I want to know if can use stock shocks up front with the control arms? next question is my pinion angle is not after the lower kit.I do have a 2…
Submitted on 2012/01/05 at 5:30 pm I too am wanting to lower my 1980 F100 stepside. I am doing a total frame off. PLease let me know if you have a kit that I can use. Clark Submitted on 2012/01/06 at 8:19 am | In reply to Clark Patton. Clark, We need to find out…
hey i have a 1990 GMC Sierra with a 350 twinturbo setup. I just wanted to know if the a-arm DJM sale can handle up to 800hp? Juan Submitted on 2012/01/06 at 8:05 am | In reply to juan. Juan, We design our parts to be as strong or stronger than the original equipment part…
Submitted on 2011/12/30 at 7:15 pm I lowered my Ram with your 2/4 kit and it was a bit lower in the front, by about 3″. I have a negative camber and my ball joints are at a sever angle. I need 2″ only because I installed 22″ rims. Can I use the control arms…
Hello, I’m using a chassis from a 1994 Dodge 1500 to hot rod my 1966 Dodge. I picked up a set of upper and lower control arms to lower the front end, but am unsure as to how to attach the upper control arms. Do I use the factory “hinge” bar (the bar that is…
Submitted on 2011/12/12 at 9:30 am I am wanting to drop my 2007 silverado ext cab 2wd 4/7. I have checked on prices through summit and it’s like $700. They suggested spindles w a flip kit n the rear and I read you sell the kit with control arms and yours is cheaper. If any,…