Submitted on 2011/09/11 at 5:32 pm I recently purchased a a DJM flip kit part 3 RK2507-7 . I had a blow out on my tires before I received my order so I purchased new tires . The tires that were on my truck were 2654022 and I had a 10 inch gap between the…
Submitted on 2011/09/10 at 11:15 am I have a 1995 GMC witha 4/6 drop installed, which includes droped spindles,coils and a flip kit and c notch. I have lost a lot of my turning radius, it seems that the tierods are in the way, I have stock wheels and tires. Is there a part that…
Submitted on 2011/08/27 at 10:36 am Hey guys what’s up! We have a 93 chevy c1500 fullsize pickup, we already have your 3/4 drop on it, but not as low as we wanted in the rear I see…so what do you guys have to add to the drop or do we need to buy a…
Submitted on 2011/08/16 at 9:30 am DJM, I read somewhere when I bought this kit for my 2003 Tahoe that if I didn’t like the rear ride height, you would swap them with the springs that are for Suburbans. I love the look, but the utility (load carrying capability) has gone away. I can’t even…
Submitted on 2011/08/15 at 4:44 am I’m looking to buy upper and lower control arms for my 70 c-10 It is stock with drum brakes, but i will add aftermarket disc brakes when i install your arms. Will this work? what part numbers? Just trying to get it right before i tear it apart. Thanks…
Submitted on 2011/07/31 at 8:41 pm I’m prepping to install the 3/4 drop on my 95′ ranger and I’m almost 3/4″ lower on the driver’s side. I want this to be level at all times. What shims should I use to correct this? Could you give me a part number for it? Thanks Tommy Submitted…
Submitted on 2011/07/30 at 8:21 pm I have 01 silverado with djm lower control arms I need the ball joint part number please, Its a 1500 2 wheel drive not hd Heath, Submitted on 2011/08/01 at 8:51 am Heath, The ball joint part number you need is 6541, this is a moog number that can…
Submitted on 2011/07/19 at 5:08 pm I have your 4″ flip kit and your 2″drop springs ! As well as shocks. Do I need both the upper and lower control arms to achieve the 4″ front drop or will I be OK with just the upper? Thanks Larry Submitted on 2011/07/20 at 10:11 am Larry,…
Submitted on 2011/07/12 at 2:09 pm i have a 2006 2wd standard cab shortbed silverado i want to do a 2/4 drop or go as low as i can without buying new shocks. i do not know what products i need to get since most places i look seem to not have products for my…