The Professional Choice

Ranger Rear Drop?

Submitted on 2011/05/24 at 2:16 pm

Ford ranger drop kits, choices maybe 2 or 3 front an 3 or 4 rear?


Submitted on 2011/05/25 at 2:24 pm


What year Ranger are you working on?

DJM Tech

4 Responses to Ranger Rear Drop?

  1. I have a 04 Ranger 3L and the front of my truck has torsion bars. Now I dont want to lower the torsion bars because I will lose its strength in the front if I do. I would like to do a 3/4 drop, however, can I use the parts for the 3/4 drop with the torsion bars? Thanks!!

    • Giullo,

      You have a “Edge” or “Sport” if you have a torsion bar front end. You are also correct when you say that lowering the front by turning the torsion bars down does remove spring rate, and rides very bad! Unfortunately we don’t make any lowering parts that will fit on you truck, you need a torsion bar key that is “re-indexed” to keep the same spring rate at a lower ride height. I did a quick scan of our competitors and don’t see a listing for your truck there either. Keep looking you may get what you need, (look for explorer applications to, might help), good luck!

      DJM Tech

  2. Does the 3″ flip kit work on the Ford Ranger 2wd with the disc brake axle on the 2010 and 2011 models? Thanks.

Leave a reply