The Professional Choice
header

Tag Archives: drop beams

I want to lower my 81 F100

Submitted on 2011/11/12 at 11:10 am

I have an 81 F-100 4×2 short flareside and need to know
easiest way to use your 84-86 DB 3003-3 beams and still retain my early F-100 4.5 bolt circle rotors and
brakes. For example, can my kingpin 81 spindles be
machined to take the 3003-3 ball-joint axles ?

I would like to know if I have to use the big/ugly
and clunky 5.5 big rotors and brakes before I purchase
the 3003-3 kit. Thanks, Chic N. Pautpi

Submitted on 2011/11/15 at 1:06 pm | In reply to Ken Hills (Chic N. Pautpi).

Chic,

Thanks for your question, it’s not easy for guy’s with 80/81/82 F100′s to find lowering parts! Lets start with your king pin beams, are they the same length or unequal lenght? Knowing that will help wit what to do next!!

DJM Tech

What’s Up

Submitted on 2011/07/04 at 2:40 pm Vehicle 1979 f150-ordered a 5inch flip kit for rear and 3inch I beams for front was told it would be plenty. But after installing shocks in the front I got an inch and a half of lift, the front sit 2inches higher than the back need to get it…Continue Reading